The magnet may have come out of where it sits and would need to be put back.
Remove the tank and have a magnet handy.If the tank is in place with enough water inside, testing the magnet sensor for the tank would be the first and easiest place to start.
Ecm synchronika full#
Make sure the water tank is full and sitting properly within the reservoir support. If the orange light is not on, this means that power is not being supplied to the rest of the machine.If the green light is on, is the orange light on?.If the green light is not illuminated this could indicate an issue with the outlet, the power chord, or the on switch.
Is the green light on in the front of the machine when the power switch is flipped? This green light represents that the machine has power.This will certainly require far too much draw and will cause a fault. Also make sure the machine is not trying to heat while sharing the circuit with other appliances such as a microwave. If the GFCI is tripping, make sure the option to heat both boilers at the same time Via the PID controller has not been selected without a dedicated 20 amp circuit to support it. This function can only be used on a dedicated 20 amp circuit. The Synchronika has an option to heat both boilers at the same time. By default, the brew boiler should heat first and the steam boiler should heat second. NOTE: Prosumers should be on a dedicated 15 amp circuit that is not being shared with other appliances.